Mi16 Oil Filler Hose Size

[TheLarneMan 4]

Folks,

 

I need to replace the oil filler hose on my Mi16 engine.

The pipework has been re-routed slightly as I have fitted throttle bodies and I'm using a generic bit of tubing at the minute.

 

Does anyone know the diameter of the outlet on the engine and the outlet at the bottom of the plastic filler?

 

Cheers.

 

 

[TheLarneMan 4]

For future reference, both outlets are 25mm.

 

As it turns out, I need to replace all breather hoses so I'll probably just buy the set from BakerBM instead of re-doing my custom setup with generic hoses.

 

Also, the outlet on the cam cover is 14mm, the smaller outlet at the bottom of the engine is 14mm and the outlet on the side of the plastic filler is 19mm.

[jackherer 543]

Talk to Stew @ BakerBM, he is supplying a hybrid set of breathers for my Mi16 on TBs, I can't remember the details but IIRC it is a mix of 8v and 16v parts.

[Miles 331 1 Cars]

You can use the 8v pipes, not quite ideal but it work's, The neatest way I've seen is a catch/filler tank on the inner wing where the washer bottle was with generic pipes going to and from it