Coin Tray Flocking - Colour?

[lightflow 59 1 Cars]

My dash is all looking brand new now, but my coin tray needs flocking. I am going to send it to be re-flocked.

 

So what colour should it be? I have a 93 Phase 2. Should the flock be black or dark grey. I am thinking dark grey rather than jet black....

[sp_en_ny 17 1 Cars]

I would say black.

[lightflow 59 1 Cars]

Yes - I had a good look again at the remnants of mine in sunlight and it does look to be black..

Edited March 10, 2015 by lightflow

[mrfirepro 127 1 Cars]

Ashley,

 

I bought the kit from eBay, I went for dark grey in the end to match P1.5.

 

[lightflow 59 1 Cars]

Looks great - and I notice you have the two rubber bump stops each side - I didn't until recently. It's the little things in life sometimes

 

I am going to go for black - mine definitely looks black on second look.

[sp_en_ny 17 1 Cars]

come to think of it, mine needs replacing too, what do you search for on ebay or google for this stuff and can you do it yourself ?

[lightflow 59 1 Cars]

Try "DIY Flocking Kit". Paul mrfirepro used on his if you look at his resto thread

 

However, I've sent mine to Banbury Flocking Services. £20 to be cleaned, flocked and posted back.

 

http://www.banburyflockingservices.com/

Edited March 12, 2015 by lightflow

[mrfirepro 127 1 Cars]

Ashley,

 

good find, as the kit will cost you £20, getting it done professionally for £20 is a no brainer.

 

And it's really messy and very hard to get into the folds of the coin slots.