Brush On Rust Converter

[artois7 21]

Hi all,

 

 

Have searched and can't find exactly what I'm after.

 

I need a brush on type rust converter to address the surface rust on my boot floor. I've spent far too long with a drill and wire brushes and am getting nowhere with it, so intend to use a converter type product and them hammerite over it.

 

All my research has lead me to products that you need to submerge the metal in instead of brushing it on. Can you recommend any of these types?

 

Ideally would be something I can go and buy rather than ordering online, but Kurust seems to be the only option at Halfords?

[Tom Fenton 1,542]

Bilt Hamber Hydrate gel is probably best. But please don't use Hammerite it's crap. Etch primer first then some kind of 2 pack epoxy paint.

[Alan77 78 1 Cars]

+1 for Bilt Hamber Hydrate 80.

[calvinhorse 870]

Deox also do a brush on gel, you can watch it reacting with the rust it's amazing stuff!

 

£15 for about 1/2 a litre is the best I found it on eBay.

[mrfirepro 127 1 Cars]

Another Bilt Hamber fan here, Hydrate 80 is fantastic, goes on Blue, turns black when cured.

[farmer 328 1 Cars]

I have found Jenolite to be effective.

Edited January 25, 2015 by farmer

[Darrens205GTI 10]

+1 for Jenolite, have always used it and never had any problems with it