Can I Use This Instead Of Breather Pipe To Induction Hose

[davey205 7 1 Cars]

As Peugeot have stopped making the breather pipe to induction hose and the remanufactured ones are so expensive can I use something like this and then block up the hole?

 

 

If I can do this, what size do I need for the oil breather filter, ( the bigger of the 2 holes leading to the air intake not throttle body. )

Edited January 20, 2015 by davey205

[Ramigojag 19 1 Cars]

I had one on my first car (saxo) and the car ran fine but over time it managed to build up a film of oil all around that filter and whatever surrounded it. So they can be messy

Edited January 20, 2015 by Ramigojag

[welshpug 1,662]

no, itll be an air leak Into the breather system.

 

just buy the hose from bbm.

[davey205 7 1 Cars]

no, itll be an air leak Into the breather system.

 

just buy the hose from bbm.

Right, thankyou.

Have emailed them to see how much the hose is singularly as they are all kits.

Edited January 20, 2015 by davey205

[Tom Fenton 1,542]

Repair it properly, buy the hose.