Convert Hydraulic Be4 Box To Manual, Possible?

[timoth123 37 1 Cars]

I'm sure I've read somewhere that it's possible to convert the hydraulic BE4 gearbox (the one on the 206 gti, ew10j4s engine) fork to a manual one that will take a BE3 cable for example. Possibly using Partner bits???

 

Can anyone confirm or deny?

Welshpug, I've got it in my head it was yourself that mentioned it??

[welshpug 1,656]

yeah, just buy the cable arm and bracket from a dealer, I would think the van clutch cable would do the trick.

 

iirc the 138 gti used a cable clutch so thats another donor for the clutch arm, not sure on the pedal box end, but the cable from a 206 may work too.

[welshpug 1,656]

or, fit the 206 master, goliath has used them on v6 conversions, probably an easier cheaper task in the end and a nice light clutch pedal

[timoth123 37 1 Cars]

This the setup you mean??

 

[RossD 44]

Which cable did you use there?

[rallyeash 155]

Off topic but I could do something similar and convert my civic type R box to manual cable like this