My 2.0T Plumbing Diagram-Correct?

[JR20516V 6]

I am trying to get my head around the correct way to plumb the coolant hoses to the Xu10j2T lump [xantia ] and have provided a rough diagram of my present setup.....have i got it right ?

 

 

Any tips most welcome..... i have searched this subject however no joy :{

[JR20516V 6]

ooops....forgot to add the diagram.

[pip470 61]

I would take the turbo feed from the radiator top hose and also feed the header tank back to the bottom hose on the engine. There is also a return from the turbo that needs to be plumbed back in.

[Tom Fenton 1,542]

Here's a pic I did a bit ago

 

[Tom Fenton 1,542]

Green pipes are the small bore self bleeds.

 

Turbo as Pip says wants to go from either stat housing or top hose, to the distribution block on the bottom of the engine near the bottom hose.

[JR20516V 6]

Great handy diagram there Tom....thank you. So what affect do you think my setup would have on overall running?

[JR20516V 6]

"Turbo as Pip says wants to go from either stat housing or top hose, to the distribution block on the bottom of the engine near the bottom hose. "...........can you elaborate on this a bit more Tom? Be sure nice if your diagram had the turbo setup included :}

[JR20516V 6]

Any chance of you adding your diagram including the turbo layout as well guys? You have me thinking now .

[Tom Fenton 1,542]

Your picture will not fill or bleed itself nicely.

[JR20516V 6]

Oh i see..... its back to the drawing board for me then. Thx for the reply Tom :}