14" Std Wheel Bolts 1.6 Cti...306 Cabby Wheel Bolts 1.9 Gti Wheels

[jimmy b 1]

Hello....I'm running a ph1 1.6 cti d reg,,std with oe 14" wheels......I've been running it with std 1.9 gti wheels also....with std bolts.....I also run a 306 1.8 cabby w reg 2000... I tried to fit my 1.9 gti rims to it as I have winter tyres fitted...but the std 306 bolts don't fit the wheel....so does the 1.6 gti 14" wheels have a shorter bolt than the 15 gti items...has anyone got a set of bolts in essex I can collect....there's a few sets on e bay around £30 ...but there's no point in buying them if they are too short...they are listing as short headed 1.6 gti / cti bolts....but the cti came with a 1.9 gti wheels later anyway...as far as I'm aware...any help appreciated....I need these on my 306 ASAP as I'm off to the Czech Republic on Thursday...the 205 is a bit too small for the 4 of us...also my indicator /headlight wand / stick came off & snapped yesterday..I can't put main beam on as quick as I'd like...& the indicators are sticking...not good on a 2000 mile trek through winter...ta jim

[welshpug 1,657]

a 2000 306 is likely to have a taper under the head for using a standard taper seat spare wheel, you need to use pre 2000 wheel bolts for alloy wheels.

Edited November 25, 2014 by welshpug

[hoodygoodwood 70 3 Cars]

I have a spare set of long headed wheel bolts , not in the best condition but useable . I am just about to drive to the Peugeot dealers in Harlow to order a couple of things , I could leave them there or you could pick them up from Enfield .