Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
erbs

Servo

Recommended Posts

erbs

where is the best place and cheapest to buy a servo for my 1.6 non sunroof 86

Share this post


Link to post
Share on other sites
Plumbob

Did you ever find one?

 

All I can get hold of is a 225mm one which doesn't fit.. Thankfully Eurocarparts kindly gave me a refund despite the fact its been sat in my loft for a year.

 

Can anyone confirm if a servo from a 106 would fit?

Share this post


Link to post
Share on other sites
HERMAN

I have 1 off a 1.9 that you can have for the cost of posting?

Share this post


Link to post
Share on other sites
Plumbob

I'll let erbs have first dibs on that. I do have an old one which looks pretty manky which I could use. I just wanted a new one as all the other major parts will be new and as its a pig of a job to change the thing I wanted a new one.

 

Thankyou very much for the offer though.

Edited by Plumbob

Share this post


Link to post
Share on other sites
Miles

The larger ones do fit with some slight modification, did it for the same reason as the rest of the engine bay was mint and didn;t want a old rusty servo on there

Share this post


Link to post
Share on other sites
Plumbob

I'm not sure I'd have got it into mine, perhaps if I'd started butchering the pedal box I could have got it lower and under the scuttle. What put me off doing that was that just going to push it closer to the engine (GTI-6) and as far as I can tell that isn't such a good idea! I've called several motor factors and my local Peugeot dealer and none of them can supply a 200mm one... surely there must be a replacement one from a different car?

 

PS... I saw your old Gentry tonight! picked up some bits from the owner...

Share this post


Link to post
Share on other sites
dobboy

Do any of you know/think that they could be wrapped to make them look a bit better?

Share this post


Link to post
Share on other sites
welshpug

I had great success just painting one.

  • Like 1

Share this post


Link to post
Share on other sites
dobboy

WP, i painted mines but the remains of a historic brake fluid leak acted like nitro morse and has peeled the paint below where the MC connects to.

Share this post


Link to post
Share on other sites
speno

I've had loads of these and no one usually wants them , In the past I've just sanded them down and painted them

Share this post


Link to post
Share on other sites
borufus

I sanded and painted mine with reasonable success! Certainly worth a try

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×