Oil Cooler Sandwich Plate Seal?

[Mattr5uk 20 5 Cars]

Just looking replace the seal on my original 1.9 oil cooler sandwich plate the part no I've been given from Peugeot is 111716 nla they are getting me a kit that may contain seal part no 112005 they can't tell me what's actually in the kit though. Anyone found any other suitable replacement seals?

[welshpug 1,661]

Got the dimensions of the seal?

 

the price of the gasket kit is about the same as the single NFP seal, and the seals from other engines so worth a shot.

[farmer 328 1 Cars]

I have got some of these in my loft can check if you want a genuine seal?

[MikeC 10]

Is it just an o-ring? If so, o-ring cord will suffice.

[welshpug 1,661]

no, its a square section circular seal/gasket

[Mattr5uk 20 5 Cars]

I'll find out if the kits any good tomorrow should be in then. Not sure of dimensions reluctant to take it back apart until I've got a replacement. The kits only £4 ish so worth a punt see what's in it tbc.......

[Mattr5uk 20 5 Cars]

No joy with the kit from Peugeot. Arrived yesterday containing 4 random sized sump plug type washers.

[farmer 328 1 Cars]

Yup just a service kit.

[Mattr5uk 20 5 Cars]

Let me know what you want for one if you could? At least won't need to pay international carriage now your still one of us

[scbond 15 1 Cars]

Let me know what you want for one if you could? At least won't need to pay international carriage now your still one of us

 

You do realise that the independence wouldn't have taken immediate effect, don't you?

 

Farmer, you're gonna run out of these at this rate

[farmer 328 1 Cars]

Got a few left in my loft but getting hard to find these days.

[scbond 15 1 Cars]

Got a few left in my loft but getting hard to find these days.

 

Well my leak hasn't come back or anything so if you want the one you sent me back we can sort that out. Was going to keep as a spare but there's a chance I'll never need it...I hope!

[farmer 328 1 Cars]

Well you can send it to the OP I suppose if he needs it.