New Car Build

[hudson 10]

Thought I'd share some pics of my new build Tarmac 205 I bought the shell from Wales a couple of years ago and have had it stripped at Ribbletech in Preston.She then went to Triple R Motorsport for seam welding and cage fitting I opted for a t45 custom cages weld in cage once fit it went over to Rogerson of Bayhorse for a full paint job.Once she was painted I then delivered her to Newton Motorsport where we will commence the build.

Edited September 15, 2014 by hudson

[stu8v 68 1 Cars]

pics?

[hudson 10]

Another

[hudson 10]

Anyone now how to rotate them as there the correct way when I attach them

[hudson 10]

Another sorry for the rotation issues

[hudson 10]

Another

[hudson 10]

Another

[hudson 10]

For choice of motor I'm going all steel Dry sumped 2 litre using Oreca internals and 48mm throttle body's and Dta S60 management.Suspension will be swapped from my old car three way Proflex and the gearbox for the time being will be my quaife gear kit five speed but next year once enough cash has been found I'll be going tractive six speed sequential

[2052NV 24]

WOW this will be amazing

[hudson 10]

Hopefully so

[stufarri 98 3 Cars]

This looks like it will be awesome with the spec you have detailed.

[welshpug 1,657]

Anything interesting going on with the suspension?

[hudson 10]

Three way proflex all round rose jointed front end weighing up the pro s and cons of the 309 rear beam set up

[hudson 10]

Old car I have has 205 rear beam on proflex handles great

[johniban 59 1 Cars]

nice

[hudson 10]

New rad and cooler from rad tech

[hudson 10]

Front view

[hudson 10]

Rear beam and pro flex rebuilt and refit yesterday ordered dta x dash as well things are coming together now

[stu8v 68 1 Cars]

Nice.

[Plumbob 66 1 Cars]

Looking good! Like the rad!

[hudson 10]

Having to send the cooler back as I ordered dash ten rather than twelve plus I'm opting for a larger cooler but she is a lovely piece of kit

[hudson 10]

New dash landed Monday things starting to take shape now

[Ron_Jaegers 10]

This seems to be coming together nicely! Very interested in hands-on experience with the dash. Is it going to be mounted on the steering wheel?

[hudson 10]

I'm planning on mounting dash to a piece of carbon then into existing clock pod using just part of the original dash

[hudson 10]

Gear stick fitted gone satchshift until I can get enough cash together for sequential

The inlet side

The inlet side