Gti6 Base Map

[RallyeP6 0]

Hi all, i am in the process of fitting Jenvey 45mm throttle bodies to my completely standard Gti6 engine. Standard injectors and will set the pressure regulator to 3 bar. I will be using it with a DTA E48 ecu that i have used previously on another engine for many years. What i am looking for is a base map or even just the ignition timing and fuel pulse (ms) so i can get the engine to idle at least. I have the dyno box also and experience using DTA windows software.

 

Thanks

Rouben.

[RallyeP6 0]

Anyone worked on Gti6 with DTA software or any other software, just to get some values please.

 

Thanks.

[unariciflocos 49 1 Cars]

Maybe this would have been better off in the Aftermaket management section of the forum.

 

No experience with DTA, but you can use google to seach the forum for other people's maps, ie. "Gti6 map site:forum.205gtidrivers.com". Some experienced engine builders on here advise against using adjustable pressure regulators and rather use a standard BOsch item.

[RallyeP6 0]

Danke, its been a few years since i properly used this forum, should have looked further down the list of sections. Yes there is lots to read on the Aftermarket Management section.