Self Built Budget Track Car Project

[blandy 29]

Well managed to get the box out today as well as taking the engine out as about time it had a Cambelt and sort a couple of small leaks.

 

Found clutch release bearing location tabs were bent and no longer attached to the fork hence the loss of the clutch pedal

 

This was in the gearbox oil .... very pretty

 

 

Don't think the new engine location will catch on

 

[welshpug 1,657]

belt and water pump were new in 2015 btw.

[blandy 29]

I wasn't sure on the history so thought it would be worthwhile I have a small leak from on of the camshaft seals so will need to come off to replace that seal so almost seems silly not to change, water pump I'll probably leave alone though