J4Rs Block To J4R Block Conversion

[nour_peugeot 5 1 Cars]

Hi guys

.

.

.

today .. i start my project .. just change my xu10j4rs block after damage and put xu10j4r block

i hope it will run good ... we will see

also wait any Questions !!

Edited July 10, 2014 by nour_peugeot

[nour_peugeot 5 1 Cars]

get out the engine

 

​

 

need to clean that

 

​

 

cyl head get out of here

 

​

 

need more than cleaning

 

​

 

intake

 

​

[JeffR 51]

Not sure what damage has been done to change blocks, but in pic3 it looks like some valves have kissed the pistons.

[petert 586]

Yep, they'll be bent........

[nour_peugeot 5 1 Cars]

The damage in the cranck and brings knock .... soon pictures uploaded

[nour_peugeot 5 1 Cars]

that's the damage in cyl number 2 and 4

 

my crank

 

â

 

my Bearings

 

​​​

 

[JeffR 51]

Nasty!

 

Can't you fit the crank from the other block into your original one? The other block may not have piston cooling sprays being from a lesser model.

[nour_peugeot 5 1 Cars]

i tried that before but the same reuslt ... you are right the new block have 2 different things ( not the same pistons - have't oil spray ) but i think the secound one not very important when i run and the first one about the pistons .. compression ratio will down 0.4 or less than that i hope less aslo we will see the result soon

[nour_peugeot 5 1 Cars]

my new block xu10j4r

have't oil spray

then cleaning cyl head

wait for more tomorrow good night

Edited July 11, 2014 by nour_peugeot

[nour_peugeot 5 1 Cars]

today i got my spare parts and make the block ready !!

my new block after cleaning

the i make my flywheel lighted stock 6600 g .... after lighted and balance 5720 g

xu10j4rs cranck bully for timing belt

the spare parts

1- spark plug

2- cyl head gasket

3- oil filter

‹

[nour_peugeot 5 1 Cars]

day 4

just little bit to finish that any way lets continue

use torqe range tool on cyl head bolts

timing belt set !!

[unariciflocos 49 1 Cars]

Did you replace the bent valves?

 

Failed bearings like that almost certainly mean ovaled rods and bent crank.

[nour_peugeot 5 1 Cars]

Did you replace the bent valves?

 

Failed bearings like that almost certainly mean ovaled rods and bent crank.

 

no i did't replace it

[nour_peugeot 5 1 Cars]

last step

‹

then painting

‹

[dcc 855]

are they the wrong plugs too?

 

waiting for the 'it wont start' thread

[allanallen 528 2 Cars]

Dear god, someone confiscate his tools.....

[nour_peugeot 5 1 Cars]

i will start it on next sat hope it work good

[nour_peugeot 5 1 Cars]

now i just finish it ... and wait for first start & first run

an this the engine

‹

wait for video soon thanks

[nour_peugeot 5 1 Cars]

first run was amazing wait for videos

[GeorgeXS 32]

Isn't that the wrong headgasket as well? Looks to have holes in the wrong place on the top right of the image?

[camgti 56]

Great work man! Good to see you getting some work done.

 

I hope it all works out. You've put in lots of work.

 

 

Maybe some encouragement for the boy!

 

Cant wait to see videos.

 

 

Cam

[nour_peugeot 5 1 Cars]

no it's the same of old one

[nour_peugeot 5 1 Cars]

finaly that's my videos for first start and first run

thanks ... i\m happy for this reuslt i think there's no diffrent btween r or rs blocks in run

wait for replays

Edited July 24, 2014 by nour_peugeot

[nour_peugeot 5 1 Cars]

no replays ? is there something wrong

[camgti 56]

Hey!

 

Car sounds great and looks like it goes well enough! Youve worked pretty hard to get the work done and seem to have the motor working well.

 

Best of luck.

 

Cam