Caliper/hub/drive Shaft Identification

[ASBGTi 9]

Evening all,

 

Is there any way of identifying what calipers/hubs and driveshafts I have on my 205? It started life as a 1.6 and has been converted to a 2ltr mi16. I am currently overhauling the brakes and suspension and am in the process collecting the bits for a gti6 brake setup. Before I start buying hubs and drive shafts I want to check what I currently have.

 

Any help will be greatly appreciated.

[welshpug 1,646]

Look at the disc offset

[pug_ham 243 3 Cars]

At a glance if you have 1.9 hubs you'll have a different, larger hub nut, usually with a locking clip rather than the staked hubnut found on base & 1.6 models.

 

Another way to identify 1.9 GTI hubs is they have two cut outs opposite each other in the drive flange.

 

g

[ASBGTi 9]

Ok thanks,

 

I'll get a couple of pictures posted up later, that should put it to bed.

 

Cheers

[ASBGTi 9]

Right, correct me if in wrong but I'm fairly sure these are 1.9 calipers which I understand fit on either 1.6 or 1.9 hubs.

 

So what hubs do I have.....

 

Cheers

Edited July 1, 2014 by ASBGTi

[welshpug 1,646]

Have a look at the article on hubs and brakes on the main website, dimensions of the discs are in it.

 

That is a 1.9 caliper.

 

has the castellated nut and r-clip that only the 1.9 used, thread is m24 with a 35mm nut.

Edited July 1, 2014 by welshpug

[ASBGTi 9]

Thanks pal

[ASBGTi 9]

Right,

 

Based on the brake article I have 1.9 brake discs. So, can I now just bolt on my gti6 brake discs and calipers?

 

Also I am after some braided hoses, will I need 205 hoses or 306 hoses?

 

Cheers

[dcc 855]

Extended 205 hoses

[ASBGTi 9]

Extended 205 hoses

Cool, know where I can get these?

[welshpug 1,646]

kam racing or pugracing.

[dcc 855]

or standard hoses with copper extensions

[ASBGTi 9]

Thanks all!

 

Finally, I have a set of 1.6 bearings in the garage, will these fit?

[Tom Fenton 1,536]

Finally, I have a set of 1.6 bearings in the garage, will these fit?

 

No.

[pug_ham 243 3 Cars]

So what hubs do I have.....

Another way to identify 1.9 GTI hubs is they have two cut outs opposite each other in the drive flange.

 

g

1.9, you can see the cut out in the drive flange I mentioned in your pictures also.

 

g

[ASBGTi 9]

1.9, you can see the cut out in the drive flange I mentioned in your pictures also.g

 

Marvellous!! Thanks everyone!