Genuine Wishbone Bush Kits 3599.07

[jackherer 543]

Has anyone bought a wishbone bush kit (3599.07) from a dealer recently? I just looked on servicebox and they are marked NFP.

 

I had a kit in my garage but one bush is missing and the rest have got damp and gone rusty.

[welshpug 1,646]

Check under the 309

[rallyeash 155]

I tried to order one 2 weeks along and discontinued. Had to order the bushes on there own

[Slo 283 1 Cars]

Balls was just going to get a set myself

[farmer 327 1 Cars]

Andy PM me and will get you in touch with some dealers.

[Slo 283 1 Cars]

Sweet

[Tom Fenton 1,536]

Well that really is a bummer. Those kits were good value for money.

[Slo 283 1 Cars]

Ive got patent wishbones on mine and within a month the steering went awful, however my track rods are well loose now, probably cos of the power and weight so them bushes are more than likely fubared too.

[GLPoomobile 958]

This is terrible news for all 205 gti owners.

[jackherer 543]

Check under the 309

 

3599 09 also NFP.

[farmer 327 1 Cars]

309 kit been NLA for some time

[welshpug 1,646]

Damn, right then Stew, new product!!

[farmer 327 1 Cars]

Personally I would say no at moment to a new kit.

 

looking at making a kit in the future may be useful of course.

 

The bushes and bolts are sold seperatly (more expensive) until they go there isn't a huge disaster

[jackherer 543]

It's a lot of money when you get them all individually. The kit used to be about £12 so even £29 seemed like a lot to me

 

I've mailed Stew @ BBM as I'm sure he'll be able to make a good (better than OE?) kit at a good price. It's not like all his other products are based on things becoming NFP, they are more like upgrades at a good price.

[farmer 327 1 Cars]

Ok be interesting what can be done

[welshpug 1,646]

Difficult to upgrade the standard bushes really

[Miles 331 1 Cars]

Good job I got a few kits the other week , Might have a word with Vibra Tech to see if there interested in making some due to the amount of Rally car's needing them

[jackherer 543]

Difficult to upgrade the standard bushes really

 

You're probably right but I'd definitely be up for trying some out made from a firmer rubber, we all know how bad it is when you have even a small amount of extra movement especially with an LSD so maybe it will be an improvement or at least they might last longer.

[dcc 855]

What about rose jointing the inner?

[Slo 283 1 Cars]

Got one of these kits and just opened it and contents aren't as straight forward as you would think, at least not to me.

 

 

The service box image shows part E as M10 plain washer and also shows part E living on both bush bolts but the rear bush bolt is M12 so wtf?

 

Also if i've arranged them in proper order I seem to have 2 extra of part E and 4 extra nylocs part C

 

Can anyone tell me where i'm going wrong? Or what the extra parts are for?

 

Can't just re-use the old washers either as they wont be correct as the subframe came to me bare so I just threw any old washers on it.

Edited June 7, 2014 by Slo

[hoodygoodwood 70 3 Cars]

I have never bought one of these kits , only single bushes .The top 2 bolts look fine , the lower 2 with the full thread I have not seen before .The washers look ok and the extra nyloc nuts might come in useful .

What make is moulded into the ends of the bushes ,I have seen/bought Motaquip bushes before and as long as they are the same quality we will hopefully not run out of these parts .

[Slo 283 1 Cars]

kleber. I noticed the full thread bolts too. Might just get those 2 bolts seperate rather than use those.

Edited June 7, 2014 by Slo

[Paul_13 212 1 Cars]

They've been supplying the kits with full thread bolts for a few years now. That's a shame they're nfp

[Slo 283 1 Cars]

Do you think if I buy those bolts seperate they will come with full thread then?

[welshpug 1,646]

just use the old bolt with a fresh nut