Xu10J2Te Sump And Generator Question

[Jakob 1]

Building together a xu10j2te with various components

 

1) it seems like there is different kind of sump models. Iron and alu version.

I have an alu version, however with oil plug in the front and a large frame (for no use) in the buttom beneith the starter.....what is oem / standard for the xu10J2te?

Any alu with oil plug in the back and no bulky frame ??

 

IMAGE - You are not allowed to use that image extension on this community.

 

IMAGE - You are not allowed to use that image extension on this community.

 

 

2) Generator belt without servo - what kind of tightning system/bracket is used? Could any one inform what is oem/standard ??

 

image as found on google

 

IMAGE - You are not allowed to use that image extension on this community.

 

 

Thanks

 

 

oh,... and what does this mean "You are not allowed to use that image extension on this community" ?

Edited May 31, 2014 by Jakob

[Jakob 1]

First and last thumpnail (had to make it smaaaaal to be allowed for upload) is for first question.

Secound thumpnail is for last question

 

hope this will turn out to be usefull

Edited May 31, 2014 by Jakob

[Slo 283 1 Cars]

I have an xu10j2te with a steel sump, it has the oil temp switch in the front underneath the oil filter.

[wicked 103 3 Cars]

The XU10j2TE has an alu sump on cars with airco; the plug on the front is not to drain it. It's for the oil temperature sender. On the alu one you need a sender with M14 thread.

(0242 81 oil sender M14 (dkz > '93)

 

For the generator I think I used the stuff from a 1.9. (not sure)

[Jakob 1]

ok, which xu alu sump will fit the xu10j2te that dosnt have the large frame towards the gearbox?

[Slo 283 1 Cars]

Just cut it off if its a problem

[Jakob 1]

Yes, it will be cut off, but it is easier if some one coud point me to the models that have the "normal" frame already oem - anyone know this?

[Jakob 1]

The XU10j2TE has an alu sump on cars with airco; the plug on the front is not to drain it. It's for the oil temperature sender. On the alu one you need a sender with M14 thread.

(0242 81 oil sender M14 (dkz > '93)

 

For the generator I think I used the stuff from a 1.9. (not sure)

Thanks for the info and item no.

any one know which xu10 engine has alu sump without aircon?