gruffa 7 Posted May 27, 2014 I was wondering if anyone had any of these for sale or knew where I could get some???? I have spoke to a bloke at a metal shop who said he could knock up some circle discs without the poppers for "a couple of quid each" if I order about 30. They would be a bit thicker at 1 mm and would need sticking in place. he also said he could powder coat 1 side for "a couple of quid each" (must be his favourite saying) and to add the poppers would pust the price up quite a bit. Just wondered what peoples thoughts were????? Share this post Link to post Share on other sites
Clapton_Is_God 21 1 Cars Posted May 27, 2014 I drew round an old paint tin and cut mine out from some scrap aluminium. Bonded them on and undersealed over them. Job done! Share this post Link to post Share on other sites
Tom Fenton 1,536 Posted May 27, 2014 As it happens I have ordered a batch of these from the laser cutters in stainless steel. Plain discs which will need to be bonded in place as the "tabs" add unneeded complication as you say. Will be available in a week or so. 3 Share this post Link to post Share on other sites
gruffa 7 Posted May 27, 2014 As it happens I have ordered a batch of these from the laser cutters in stainless steel. Plain discs which will need to be bonded in place as the "tabs" add unneeded complication as you say. Will be available in a week or so. Cool, i'll hang off them then, how much will you be selling em for roughly??? Share this post Link to post Share on other sites
Tom Fenton 1,536 Posted May 27, 2014 Price TBC at the moment, as my plan is to supply them with a self adhesive foam tape ring so you can just peel the cover off and stick them to the floorpan. Share this post Link to post Share on other sites
gruffa 7 Posted May 27, 2014 OK, keep me notified and i'll prob have a set off ya Share this post Link to post Share on other sites
pug_ham 243 3 Cars Posted May 27, 2014 You can buy them from Peugeot in plastic, as used on the 306 etc. I'll search the number out soon & post it when I can but iirc it's been posted on here before. g Share this post Link to post Share on other sites
Miles 331 1 Cars Posted May 27, 2014 As said, Pug do them now in plastic with a nice seal on them Share this post Link to post Share on other sites
gruffa 7 Posted July 15, 2014 has anyone got the part number for these??? Share this post Link to post Share on other sites
camgti 56 Posted July 17, 2014 +1 on the part number.. Share this post Link to post Share on other sites
boldy205 74 Posted July 20, 2014 Where do these fit? Share this post Link to post Share on other sites
boldy205 74 Posted July 22, 2014 Ahh right, I can finaly sleep! Share this post Link to post Share on other sites
murtaghp 3 Posted August 13, 2014 Pug part number is 7518Y2 - £1.69 each. Knowing Peugeot, you will probably have to buy 50 of them. Share this post Link to post Share on other sites
Clarky3rdNut 13 Posted August 13, 2014 If anyone is prepared to pop to their local peugeot to buy some I'll chip in for a set! Share this post Link to post Share on other sites
murtaghp 3 Posted August 13, 2014 I'm going in the next couple of days so I'll keep you posted. Share this post Link to post Share on other sites
Kane 34 Posted August 13, 2014 If there are minimum orders you might as well just make some up yourself from sheet metal. I've just done some in zintec, bonded them in and then painted over. Share this post Link to post Share on other sites
pug_ham 243 3 Cars Posted August 17, 2014 I don't think there are minimum order quantities, they are used on the 306 & various other models so at most they are sold in pairs iirc. g Share this post Link to post Share on other sites
murtaghp 3 Posted August 20, 2014 Got 2 plates from the dealers yesterday for the stated price. No minimum quantities as pug_ham suggested. Share this post Link to post Share on other sites
Clarky3rdNut 13 Posted August 20, 2014 Yes please!! Share this post Link to post Share on other sites
mowflow 67 Posted August 20, 2014 What are the holes that these things cover for? Share this post Link to post Share on other sites
Clarky3rdNut 13 Posted August 20, 2014 Not really sure. I'm guessing as a drain for when the shells were dipped at some point during production? They have a kind of guttering system leading to them after all. Share this post Link to post Share on other sites
murtaghp 3 Posted August 20, 2014 Sorry, this was not a for sale reply, it was for information only. Share this post Link to post Share on other sites
