Floor Plates?

[gruffa 7]

I was wondering if anyone had any of these for sale or knew where I could get some????

I have spoke to a bloke at a metal shop who said he could knock up some circle discs without the poppers for "a couple of quid each" if I order about 30.

They would be a bit thicker at 1 mm and would need sticking in place. he also said he could powder coat 1 side for "a couple of quid each" (must be his favourite saying) and to add the poppers would pust the price up quite a bit.

Just wondered what peoples thoughts were?????

[Clapton_Is_God 21 1 Cars]

I drew round an old paint tin and cut mine out from some scrap aluminium. Bonded them on and undersealed over them. Job done!

[Tom Fenton 1,541]

As it happens I have ordered a batch of these from the laser cutters in stainless steel. Plain discs which will need to be bonded in place as the "tabs" add unneeded complication as you say. Will be available in a week or so.

[gruffa 7]

As it happens I have ordered a batch of these from the laser cutters in stainless steel. Plain discs which will need to be bonded in place as the "tabs" add unneeded complication as you say. Will be available in a week or so.

Cool, i'll hang off them then, how much will you be selling em for roughly???

[Tom Fenton 1,541]

Price TBC at the moment, as my plan is to supply them with a self adhesive foam tape ring so you can just peel the cover off and stick them to the floorpan.

[gruffa 7]

OK, keep me notified and i'll prob have a set off ya

[pug_ham 244 3 Cars]

You can buy them from Peugeot in plastic, as used on the 306 etc.

 

I'll search the number out soon & post it when I can but iirc it's been posted on here before.

 

g

[Miles 331 1 Cars]

As said, Pug do them now in plastic with a nice seal on them

[gruffa 7]

has anyone got the part number for these???

[camgti 56]

+1 on the part number..

[boldy205 75]

Where do these fit?

[welshpug 1,656]

In the floor.

[boldy205 75]

Of what?

[welshpug 1,656]

a 205

[boldy205 75]

Ahh right, I can finaly sleep!

[murtaghp 3]

Pug part number is 7518Y2 - £1.69 each.

 

Knowing Peugeot, you will probably have to buy 50 of them.

[Clarky3rdNut 13]

If anyone is prepared to pop to their local peugeot to buy some I'll chip in for a set!

[murtaghp 3]

I'm going in the next couple of days so I'll keep you posted.

[Kane 34]

If there are minimum orders you might as well just make some up yourself from sheet metal. I've just done some in zintec, bonded them in and then painted over.

[pug_ham 244 3 Cars]

I don't think there are minimum order quantities, they are used on the 306 & various other models so at most they are sold in pairs iirc.

 

g

[murtaghp 3]

Got 2 plates from the dealers yesterday for the stated price.

 

No minimum quantities as pug_ham suggested.

[Clarky3rdNut 13]

Yes please!!

[mowflow 67]

What are the holes that these things cover for?

[Clarky3rdNut 13]

Not really sure. I'm guessing as a drain for when the shells were dipped at some point during production?

 

They have a kind of guttering system leading to them after all.

[murtaghp 3]

Sorry, this was not a for sale reply, it was for information only.