Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
deathbringer929

205 Gti 6 Starting Issue

Recommended Posts

deathbringer929

hi folks.

 

intermittently over the last few weeks its not started when ignition turned to crank. turn off back on again and its started.

 

last night however it wont start at all. got 0.40 volts at starter solenoid when key in crank position and zero when off crank. wheres best place to start looking to cure this fault? ignotion switch or harness issue? thanks.

Share this post


Link to post
Share on other sites
welshpug

could be either, you need to investigate :)

Share this post


Link to post
Share on other sites
Anthony

Or the immoboliser if there's one fitted.

Share this post


Link to post
Share on other sites
deathbringer929

thanks gents. i'll get busy and report back!

Share this post


Link to post
Share on other sites
deathbringer929

so, disconnect white plug from ignition barrell and it gives 12v on crank. plug it back in and turn to crank and wire 46 gets hot??

Share this post


Link to post
Share on other sites
deathbringer929

turned out to be a poor connection on the small brown plug next to heater matrix!

Share this post


Link to post
Share on other sites
Tom Fenton

Well done youth all sorted then ready for Monday?

Share this post


Link to post
Share on other sites
deathbringer929

Well done youth all sorted then ready for Monday?

sure is tommy lad. needs a wax though... maybe later. you ought to be rolling up in a peugeot...

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×