Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Dale

Coolant Temp Sesnor

Recommended Posts

Dale

Hi guys recently bought this from ebay (febi 60767) make and number, was wondering if this is correct sensor for my car. standard 1990 g-reg 1.9 gti?

If so am i correct in thinking it goes under the dizzy, the blue capped one?

im sorry if this has been covered and im aware of how thick this question must seem to some of you!, but thanks fro looking.

 

a9b5cac3-a32e-443e-8e8a-abdbc5f5ce64_zps

Share this post


Link to post
Share on other sites
welshpug

helpfully FEBI put the o.e.m's part number on there, so you can go on;

 

http://public.servicebox.peugeot.com/

 

and cross reference to the application very quickly, and also note that Peugeot probably still sell it themselves.

 

1337 72
THERMISTOR
DIAM 14X1.25

 

 

it is correct for the temperature gauge on all gti's, infact nearly all 205's.

Share this post


Link to post
Share on other sites
Dale

Thankyou for the reply welshpug, ill crack on today with it then. Am i right in thinking its the blue sensor?

Share this post


Link to post
Share on other sites
welshpug

DOES IT LOOK BLUE?!

Share this post


Link to post
Share on other sites
dcc

Replace it with the one which it matches. There are 2 spade sensors on the back of the thermostat housing,

Share this post


Link to post
Share on other sites
Dale

LOL! see wat you mean, Cheers again

Share this post


Link to post
Share on other sites
welshpug

25-02-07_2220.jpg

  • Like 1

Share this post


Link to post
Share on other sites
Dale

Cheers guys, just took a look at the sensors, but ive only got two there, where I thought id have three. Theres the stop light one the one next to that which has the red clip on, then under those in the middle theres a hole and a brass looking plate or plug there behind the thread. Is that odd or normal?

Share this post


Link to post
Share on other sites
welshpug

Yep, sounds like a pre phase 2, theres a housing bolted to the side which the sad is fixed to, the cts is in the side of that under the distributor.

Share this post


Link to post
Share on other sites
Dale

Thanks for the reply again welshpug, was begging to think it mite have been messed around with but thanks for clearing that thought up

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×