Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
forbeslongden

Power Steering Questions

Recommended Posts

forbeslongden

Hey guys,

 

My 1.6 GTi is back on the road and when talking to the previous owner, he said that the power steering was removed - I'd quite like to get it put back in, I've sourced the rack and pumps etc..

 

Attached is a picture, is it going to be easy enough for a garage to fit it back in - assuming the PAS steering rack is still in the car?

post-23672-0-07152700-1396212813_thumb.jpg

Share this post


Link to post
Share on other sites
farmer

You could do it wouldn't be a chore?

Share this post


Link to post
Share on other sites
Miles

Most of that's wrong as its either off a Dirty Derv or mi16

 

You need the 8v pipes, mounting brackets and the most important thing the steering UJ

 

ebay I guess

Edited by Miles

Share this post


Link to post
Share on other sites
forbeslongden

Damn, can I use any of the stuff there or is it all incompatible ?

Share this post


Link to post
Share on other sites
welshpug

you can use the rack and the bottle.

Share this post


Link to post
Share on other sites
Slo

Bit a crude picture but these are all the parts you need for pas on a standard 205

 

KGrHqRkwE8NuvfT4BPR5zQYYQ60_12_zpse4e3c6

  • Like 1

Share this post


Link to post
Share on other sites
forbeslongden

How easy is it to source a 1.6 PAS complete kit, minus the steering rack?

Share this post


Link to post
Share on other sites
Miles

Not too bad, I may have enough part's kicking around but I cannot check until late in the week

  • Like 1

Share this post


Link to post
Share on other sites
forbeslongden

That'd be cool if you do Miles, it might seem a silly question to guys like you in the know but my GTi idles at around 1000 sometimes a little less although it doesn't like any less, will the PAS cause any excessive load on the power and cause it to stall or does it make no difference?

Share this post


Link to post
Share on other sites
2-Pugs

I did retro fit PAS once to one of my previous GTI's and didn't know anything about the cooling pipe at the time so I didn't fit it. Anyway it was fine for years. So if you don't get that bit I would say don't worry too much.

 

It would be worth checking to see if you still have the PAS rack fitted.

 

As for the load on the engine no it's negligible I'd say and won't cause it to stall, well not in my experience anyway.

  • Like 1

Share this post


Link to post
Share on other sites
forbeslongden

Thank you very much for the advice! I guess the next step is sourcing the right bits!

Share this post


Link to post
Share on other sites
Miles

I will have a kit in a few weeks time when a car comes in to remove it all, Drop me a PM and I'll remember to contact you or I will forget

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×