205 Gti6 Conversion Problems

[phill_lloyd 0]

Hey all I'm new to using forums but I'm having problems with my gti6 conversion can't seam to get it to start

 

I been told the engine came out of a s reg xsara

First the 19 pin plug that ppl say U need to use to wire mine loom has 20 wires there

So wired it using a loom conversion guide

The pump stays on and doesn't just prime it stays on all the time can't seam to get spark but plugs are getting wet

 

I have 2 ecus one is defo meant to be unlocked and has the I mobilizer pin missing

 

Hope someone can help me out

[dobboy 231 2 Cars]

phil, i'm a bit of an expert after doing it ohhhhh once!

 

Happy to help but would need more info/detail...... what did you have....year/Ph etc?? and what have you done?

 

BTW, as i've learned recently, got a big enough battery?

[welshpug 1,657]

Have you confirmed the function of each wire?

[phill_lloyd 0]

Thanks for the replays the engine was meant to be out of a phase 1 xsara

How can I tell this ?

 

Have labeled most of loom apart from 2 wires

I copied a thread on here and that tread had 2 wires in labeled

[phill_lloyd 0]

Thanks for the replays the engine was meant to be out of a phase 1 xsara

How can I tell this ?

 

Have labeled most of loom apart from 2 wires

I copied a thread on here and that tread had 2 wires in labeled

In labeled meant to be not labeled

[dobboy 231 2 Cars]

Phil, ignoring all the wires associated with the dash/indication, there are only really 3 wires you need to get right, 32, 76, and the starter/solenoid wire..... And all the ECU/sensor stuff which is hard to get wrong.

 

WP or somebody will be able to help but you need to give more info/pics etc, not many on here do mind reading/lottery numbers etc

 

Have you proved the ECU unlocked, proved you have a spark?

 

My car wouldn't start because of poor battery connections and not a big enough battery, it sounded as though it wanted to, but won't until you get these right....... Took me a day to find that one out!

[phill_lloyd 0]

Dobboy I'm taking the ecu tonight to see if it defo unlocked can't seam to get spark injectors are firing will check battery voltage when cranking tonight