Engine Mounts Febi

[jimakos205 0]

anyone knows if the engine mounts "febi" (bilstein group) are like oem or are very soft as many aftermarket?

Edited March 25, 2014 by jimakos205

[Daviewonder 533 3 Cars]

All Febi parts are oem quality or better.

[farmer 328 1 Cars]

They are "fabi" according to Dave

[Daviewonder 533 3 Cars]

They'd better be as I've just replaced every single bush and rubber mount on my car with them.

[farmer 328 1 Cars]

Squeaky bum time

[jimakos205 0]

my problem with the engine mounts and in particular with the lower is that,when is new is ok but after some km became "chewing gum" and the engine "dancing".I hope that febi isnt like others i ve tried.

[farmer 328 1 Cars]

I have a genuine bush and new mount but it is expensive compared to just a bush.

[James Cornell 10]

If you're replacing all of the mounts is it not worth using the BBM ones as I think the whole sets about 120 quid and they are made uprated rubber

[2-Pugs 57]

Provided you don't mind your dash rattling itself to bits, the BBM ones are fine

[Tom Fenton 1,542]

I hear this a lot, yes when brand new the BBM lower bush is harsh, however persevere for 500 miles and they settle down lovely.

[erbs 42 1 Cars]

are the engine mounts say from ecp or gsf any good?

[jimakos205 0]

Ive tryed a lower bush bbm for a few km and ive got a lot of virbration on my cti.are you sure that after 500km will be ok without vibration?

[James Cornell 10]

Oh no I have some fillings, maybe I should not get bbm's

[welshpug 1,661]

I still don't like the vibrations they give and mine has probably had 5k.

[jimakos205 0]

You have only the lower bbm or all the set??

[welshpug 1,661]

only the lower.

[joshsnoad 2]

Sorry to go slightly off topic but a lot of people say the bum solid rear beam kit is a really good upgrade. How badly does this make the car rattle in your experience?

[Tom Fenton 1,542]

At the end of the day, if you want quiet and comfortable fit standard mounts!

 

If you want less stuff wanking around on rubbers buy uprated but accept the noise increase.

 

Each to their own!

[welshpug 1,661]

its only the magnex that wanks about because the flexi is in the wrong place, would be fine with a standard or different design manifold.

[Jme 7 1 Cars]

has anyone tryed the vibra tecnics one's im thinking about as it as my car only for the track but im not sure coz £200 quid is alot of cash for 2 mounts as i have solid ali lower

[Miles 331 1 Cars]

They are solely what I use for uprated mounts and suspension parts now having tried all others in the past, 2 spec's of them in road and race on the 205 and have them in stock.

[Jme 7 1 Cars]

what u have in stock the vibra engine mounts??

[Miles 331 1 Cars]

Either Road or Race spec, PM me for further details