Calipers

[erbs 42 1 Cars]

On my pug the front calipers are seized solid, is there a like for like calipers from later pugs like the 306

 

or something along those lines I could easily obtain from the scrap yard as a direct replacement on the same sized discs from the 1.6

Edited March 22, 2014 by erbs

[pug_ham 244 3 Cars]

You can fit the girling calipers & pads from a 1.9 with the correct bolts as well for a direct swap over the Bendix calipers orginally used on the 1.6 GTI.

 

I have done this on mine.

 

g

[erbs 42 1 Cars]

Thanks for the reply

 

the reason why i am asking is that I'm not gonna find a 1.9 in the scrappy and i have seen loads of xsara's 106, 306's in my local scrap yard that is 5 mins away from my house rather than waiting for post

 

easier for me and i can grab what i need off the cars plus any extra bolts that i can use

 

last time i asked for a set of calipers i was charged a tenner for the pair so cheap too

Edited March 22, 2014 by erbs

[pug_ham 244 3 Cars]

If you find a newer pug with the same size discs (247mm) you can use those but put up a wanted ad on here & I'm sure you could find a set of the 1.9 calipers easily enough, maybe not for £10 though.

 

g

[Miles 331 1 Cars]

Early Meganes and Clio's use the same calliper

[erbs 42 1 Cars]

Early Meganes and Clio's use the same calliper

Thank you

[mowflow 67]

It is indeed. Both my calipers are fubar'd. I looked at rebuild kits but it cost about the same to just buy a brand new pair of calipers. I can't 1.9 calipers are usually pretty pricey and more often than not are being sold without the mounting bolts. Probably worth changing to the 1.9s if you can get them though. From what I've read they are more reliable.

[erbs 42 1 Cars]

went to the local scrappy and a found a perfect set of Bendix calipers ,all complete and no perished rubbers and pistons move freely all for a princely sum of £10

 

Bargain!!!!!!!!!!!!!!!!