Xsara Senders

[shooter mcgavin 37]

 

I'm at the point now where I'm fitting the phase 2 306 loom to the xsara engine but I'm a bit unsure about some if the senders.

 

Can I chop the green ECU coolant sensor plug off the xsara loom to suit?

 

Will I need to fit a 306 blue coolant sensor switch (dash)? Can't see one on the xsara.

 

Another problem I've noticed is that the double relays are different from xsara-306

 

 

[welshpug 1,657]

Use whichever relay fits the loom, fit the 306 green sender and 205 gauge switch+sender.

[shooter mcgavin 37]

I only have a xsara relay, the 306 loom never came with one.

 

I'll have to pick up a 306 green too. Are the 205 items 2 pin connectors?

[welshpug 1,657]

No, 205 items are single spade type, so youll need to remove thd blue plug and fot two spades.

[Miles 331 1 Cars]

You'll need a load more too, At least

 

Knock Sensor

Water Temp sensor's

Oil Pressure Sender

Map sensor or wiring

Low oil sender plug

[shooter mcgavin 37]

Remind me to never ever use a xsara again

[shooter mcgavin 37]

Knock sensor I have

Low oil sender I have

Oil pressure can I use 205?

Map I haven looked at

Water? that would be the blue and green I was talking about?

Edited February 23, 2014 by shooter mcgavin

[welshpug 1,657]

yup.

[shooter mcgavin 37]

Cheers