Mintex 1144

[Furyblade_Lee 2]

Has anyone got a part number for these front pads on an E reg 1.6 Gti? Phase 1.5 I assume ( I have the later dashboard ) ? Can only see ones advertised upto 1987? Do they change after that or something?

Thanks.

[Furyblade_Lee 2]

OK then , did the 1.6 Gti change pad design after 1987?

[pug_ham 244 3 Cars]

I think they should be MDB1291, only reason I can see why they list the dates until mid 1987 is because of the engine change to 115bhp XU5JA from the 105bhp XU5J.

 

Both of my 1988 1.6 GTI's had Bendix front brakes.

 

g

[Miles 331 1 Cars]

Be careful on any listing's, I'm sure when I have supplied these they are listed for something else and not a 205 but this is Mintex all over so nothing to worry about, If you need a set I can look into it for you

[Furyblade_Lee 2]

Miles if you could mate that would be great, I need a set ASAP! Cheers, Lee

[Furyblade_Lee 2]

Had a look at the calipers earlier, and they definitely have " Bendix" written on them so should I be OK with the '87 ones?

[pug_ham 244 3 Cars]

I got the number posted above from the Mintex brake book

 

MDB1291

Supersedes: MDB1215

Fitting Position: Front Axle; Manufacturer Restriction: Bendix

Brake System: Bendix; Width [mm]: 105; Height [mm]: 54.3; Thickness [mm]: 18; Wear Warning Contact: with integrated wear sensor

g

[welshpug 1,655]

Check which pads you have, some are offset friction material.