Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
aldworth33

A Few Simple Question

Recommended Posts

aldworth33

1. I have an alloy coolant expansion tank which never seems to be pressurised, I think it's the cap because it doesn't feel like it's sealing properly but I'm not sure anyone know where to get replacement as I don't know what make it is.

 

2. My oil temperature and coolant temperature gauges aren't working as they should, I'm assuming this is due to the Xsara sensors being different (prob been asked a million times before) is this right? And do the standard sensors for the Xsara engine easily?

 

Cheers in advance

Share this post


Link to post
Share on other sites
cheesegrater

Oil temp is done off of the sensor in the sump at the front. One pin of the plug will work so try swapping the wire position. You need to use the 205 water temperature sensor for the gauge to read right. Make sure you don't get confused with the over temp switch which has a similar appearance and won't work.

Share this post


Link to post
Share on other sites
aldworth33

Ok cheers I'll see if I can sort them, been annoying me as long as iv had it

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×