Ma Gearbox With 309 Suspension Arms, Which Driveshafts

[Dave G 0]

Just wondering if this been done.

 

I'm sticking with an am gearbox but going to gti subframe with 309 arms.

 

I have heard gti drives make the shafts do for the 309 arms but I think it will be to much of a push to ask them to go from the RCA setup to 309 front suspension arm setup.

 

Any info on shaft lengths and if anyone has ran into problems would be great

 

Cheers

 

Dave

[calvinhorse 870]

Super rare 309 1.4 tu engine driveshafts.

 

It must be the tu/ma not the 1.3 talbot engine 309

[Dave G 0]

Thank Calvin, does anyone have a reg number or a oe number for these.

[welshpug 1,661]

see link in my sig, and pinned topic at the top of "Misc/General Technical"

[Dave G 0]

Just abit stuck as I know the tu3 is the 1.4 but do I need pre or post 89 and what is tu3a and tu3s? Thanks again guys for your patience

[309jazzpanda 41]

Its a post 89 phase 2 309 you need, pretty sure they are available aftermarket still