Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
happypatrol

Oil Pressure Guage Not Moving. Which Sensor ?

Recommended Posts

happypatrol

Hi guys. My variable oil pressure guage has recently stopped working.

 

I

 

Not sure which sensor it is on the front of the block???

 

Also does anyone know why's sort if voltage or resistance I should have with the ignition on at the wiring.

 

I need to get this fixed ASAP.

 

Thanks.

Share this post


Link to post
Share on other sites
Tom Fenton

Just to the right of the alternator are two senders, the larger of the two is the gauge sender. However do a search on here for "brown multiplug" as very often this is the cause of the fault and not the sender unit. As a quick test pull the spade connector off and use something to earth the wire to something solid and metal, the block etc. Then with ignition on, look at your gauge. If the wiring is good then the gauge should show full scale. If if doesn't then you have a wiring problem somewhere.

  • Like 1

Share this post


Link to post
Share on other sites
Tom Fenton

The other one is a switch to turn on the low oil pressure warning light.

Share this post


Link to post
Share on other sites
farmer

Wouldn't go to Pug for the Mushroom sender, as its 3 figures from memory.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×