What Crankshaft

[Steve 15 1 Cars]

What crankshaft fits the xm 2.0 turbo, as i have a new mi16 crank. The turbo crank is too worn to use. can i use the mi16 rods.

[B1ack_Mi16 67]

You could possibly use the Mi16 one, but depends on the engine type if you got flat top or dished pistons. The Mi16 one has 88mm stroke opposed to 86mm on the 2.0 turbo.

 

Also if there is any signs of bore-wear I would assume the piston rings might be disturbed of increasing the stroke beyond standard. So that way you're better of getting a crank from a 2.0 engine.

 

I believe you only would change the crank, leave orginal pistons and rods in place. Mi16 rods are significantly shorter as the alloy block is shorter. Unless your are talking about a 2.0 Mi16 engine?

In that case the crank would match good.

[Steve 15 1 Cars]

Thanks for your rapid reply B1ack_Mi16 i've managed to source a very good turbo crank and i will be using that