Removing A Door

[DC2T 51]

I apologise if this has been covered but i couldnt find it with a search, i want to remove my doors as theyre getting in the way at the mo. I thought it was just the 4 bolts so removed them to find the check strap didnt just pop through, so i loosened the check strap and again it just didnt come through, do i just need to tap the roll pin through to seperate the check strap? or is there something else ive overlooked

 

thanks in advance

[Redtop 14 2 Cars]

Yes you need to knock the roll pin through on the checkstrap. Your door will be either held on by 2 double roll pins, or on the fresher cars 91 or so on, it will be 2 torx bolts at the hinge. I always found it easier to remove them here, rather than at the bolts, means your door gaps don't need re adjusting come fitting time.

[DC2T 51]

There were no torx bolts i could see, only a rollpin with a rollpin it looked like. Its only a base model so i duno if itd be different. Ill get my punches from work tomorrow and knock them out

[DC2T 51]

Just got it off, i see the torx screws you mean now and agree itd have been easier to remove those. Lesson learnt

 

Cheers