Disconnecting A Phase 2 Vts Ecu

[shooter mcgavin 37]

Just about to remove a lump for my phase 2 xsara vts and just wondered what needs to be done before removing the ecu to ensure it's unlocked.

[welshpug 1,657]

Cant be used in a 205 very easily (like phase1 or 306) so it doesnt matter, you wont be using it.

[shooter mcgavin 37]

I didn't know that, so what's my options, can I use the loom with a phase 1 306 ecu.

[welshpug 1,657]

no, you need a phase1 vts loom and ecu or any 306 loom and ecu.

[dcc 855]

Its a multiplexed loom and ecu. Some of the sensors differ too. As meirion has said you need the phase 1 xsara vts loom or any 306 gti 6. Ofcourse an ecu too. But some sensors on your engine will be different to the loom

[shooter mcgavin 37]

No problem I'll try the wanted section thanks.

Last conversion was phase1 306, just assumed phase 2 vts would be similar.

[shooter mcgavin 37]

I take it I'll need to replace some of the sensors too? Phase 1 was so simple compared to this junk

[welshpug 1,657]

actually the phase2 is simpler as its digital and uses one temperature sensor instead of three

 

there's a hint for you

 

you'll need to basically get anything the earlier non-multiplex loom doesn't fit, which afaik specifically is only the temperature sender.

 

you will need the earlier injectors too, and if you get a pre 98 loom you'll need the earlier map sensor too.

Edited December 28, 2013 by welshpug

[shooter mcgavin 37]

If anyone was going to know this stuff I knew It would have been you :-)

Can't point me in the direction of a loom and ecu can you :-0

[shooter mcgavin 37]

So my best option is looking for a phase 2 gti6 loom and ecu?

Can anyone help out with this

[Miles 331 1 Cars]

You need the knock sensor & ECU Temp sender, Injectors you can use and I have found no issues with the one's I tried with the std ECU

[shooter mcgavin 37]

Thanks miles, can I use a phase 1 vts loom and ecu?

I will also need knock sensor and ecu tempo sender?

[Miles 331 1 Cars]

Yes you can use a phase 1 VTS loom, Mind the 306 looms are easier and neater

[shooter mcgavin 37]

thanks, ive no clue until I have the loom in front of me what ill need.