Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Daniel306

Replacing Quatter

Recommended Posts

Daniel306

Going to replace the quartet panel, the panel separated from the inner arch and has caused rust along the inside and rotted under the arch trim, im also planing to change the rood skin for a non-sunroof, iv got a spare shell that's rotten but has got the parts i need in good condition, has anyone got any photos or a guide for it?

Share this post


Link to post
Share on other sites
welshpug

there's a few topics that have covered both tasks briefly, namely craig's lazer resto had both quarters iirc, and paintguy did a roof swap a few years ago.

Share this post


Link to post
Share on other sites
Daniel306

How did you find it, not too hard really?

 

Im currently replacing the front panel, both front wings, fitting new radiator and an intercooler. The drivers side lower door hinge has rusted from the inside out too.

Share this post


Link to post
Share on other sites
Daniel306

Not too sure how im going to fIX this one yet

 

 

20131223_135929_zps9bda88d9.jpg

Share this post


Link to post
Share on other sites
welshpug

should be a fairly simple repair, cut out a square around the hinge, remove hinge from the remains of panel, let in a square of fresh metal, weld hinge back to pillar.

 

perfect opportunity to fit a new hinge if you have worn ones, or at least to repair the ones you have.

Share this post


Link to post
Share on other sites
Juttie205

You not doing your dimma anymore?

Share this post


Link to post
Share on other sites
Daniel306

Not with this car, don't want to fit a kit one a clean one

Share this post


Link to post
Share on other sites
Daniel306

Is it just bonded on along the sill?

Share this post


Link to post
Share on other sites
farmer

If you are wanting / needing a new hinge I have some I think.

 

Comes with new door pin as well

Share this post


Link to post
Share on other sites
Daniel306

I was planing to cut the complete section from the scrap car, just removed the quartet, what looked good on the outside was rotten on the inside

 

Where can i get a new quarter?

Share this post


Link to post
Share on other sites
welshpug

Ebay, breakers, dealer.

Share this post


Link to post
Share on other sites
Daniel306

Dealer? still get them new?

Share this post


Link to post
Share on other sites
Juttie205

Spoox motorsport have a brand new n/s one but bit pricey at £360

Share this post


Link to post
Share on other sites
Daniel306

Is there many motor factors that sell panels? Ecp don't list them but il phone them tomorrow and see if they can order them

Share this post


Link to post
Share on other sites
farmer

I would think the rear quarter panel is dealer only.

Share this post


Link to post
Share on other sites
Daniel306

There are non genuine out there so there must be someone making them

Edited by Daniel306

Share this post


Link to post
Share on other sites
farmer

Finding them is a tricky part, I have a couple reserved for me in Belgium.

 

Its the shipping that is the problem.

 

I wonder how the pattern ones will fit mind ?

Share this post


Link to post
Share on other sites
Daniel306

If there rust free il make it fit

  • Like 1

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×