205 Gti Interior Uprades?

[Karl 15 1 Cars]

now then guys its been a while!

just wondering what upgrades are possible for the 205 gti I currently have a phase 1 and tbh the interior sucks

is it possible to do a straight swap from a ph1 to a ph2 ?

are there other options without bodging or a ridiculuous amount of modifying?

has anyone got a complete interior in good condition for sale?

any creative input or suggestions welcome

thanks in advance guys

 

[DC2T 51]

ive seen them with vtr/s dashes before but duno whats involved in making them fit. im fitting an ITR dash in mine

[acox99 74 1 Cars]

If you want a ph1.5/2 dash buy another car surely.

[Edp 67 3 Cars]

agree with above, surely buy a phase 1.5/2 car?

 

phase 1 cars are becoming rare nowadays.

[calvinhorse 870]

The dash would require a change of the full wiring loom

[speno 239 2 Cars]

http://www.ebay.co.uk/itm/205-gti-show-car-interior-/231111339457?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35cf4f2dc1

 

Feast your eyes ^^^

[Karl 15 1 Cars]

id rather not buy another car mine has a gti6 conversion aswell and is in almost immaculate condition baring sum rust on the front drivers side wing so buying a new car isn't an option so if I where to swap from a ph 1 interior to a ph 2 id have to modify the loom ?? why would I have to do that

[Karl 15 1 Cars]

that show car interior must weigh a ton lol id rather keep my car to an oe standard with subtle modifications but thanks anywyay

[DamirGTI 342]

if I where to swap from a ph 1 interior to a ph 2 id have to modify the loom ?? why would I have to do that

 

Ph1 dash loom connectors wont fit on Ph2 dash switches - fog light switch , demister , hazards etc.. also the cabin cooling/heating illumination is different layout as is the potentiometer all in one connector , rather than separate wiring with single bulbs on the Ph1 .. plus the Ph1 loom is too short so if opted for rewiring to suite the Ph2 you'll need to extend it and will need to add/solder required connectors for Ph2 switches .

 

I did this years ago cos my Ph1 dash was all cracked and with missing bits and pieces which i was unable to find to pile it all together so i opted for a Ph2 dash conversion ...

You'll need complete Ph2 (or Ph1.5 same thing just the colour shade difference) dash , Ph2 heater box (can't fit Ph2 cooling/heating control knob system on Ph1 heater box..) and Ph2 dash wiring loom with connectors and switches (i did the rewiring from Ph1 to Ph2 cos i didn't have complete loom just connectors , it wasn't hard job an quick blast trough wiring diagram and some wiring soldering did the trick but having complete uncut Ph2 loom makes it plug and play option without the need for rewiring soldering etc.)

 

D

[MiniGibbo 142]

If you're serious about this I have a phase 1.5 In bits we can swop over.