Removing Oem Gti Wheel Lockers..

[MiniGibbo 142]

As above really I need to remove some oem lockers I don't have the key for.. I can get a picture if needed but you're the type that are flat headed with holes drilled in..?

 

Was thinking of bashing the out with a screwdriver and hammer using the holes, any better ideas..?

[dcc 855]

Several carbide drillbits and a lot of patience. Good luck.

[Tom Fenton 1,536]

Normal drills will suffice, I've drilled plenty of them out, they are not particularly hard.

[Miles 331 1 Cars]

Drill's nooo, dead easy to remove most nuts with 1 key, should have said as I have a few at work

[Daviewonder 533 3 Cars]

If you have access to a welder then just weld some old bolts onto them and then undo them.

[ORB 227 1 Cars]

If they are standard pug lockers, a cold chisel will normally do it.

[MiniGibbo 142]

Thanks guys,

 

I didn't even think Miles.. I forgot about them until later yesterday afternoon haha