Electric Window Problems

[riddlecharlie 0]

I've got an issue with my electric windows. Neither of them work, all switches have power running to the 3rd pin and I have tested all of the switches using a multi-meter and they work as they should. However when I press any of the switches the voltage on any all of the points is then nothing and the motors don't kick in as far as I can tell. Anyone have any ideas on what to check next, or the best way of linking 12v and a ground up to the motor bearing in mind it is up in the door out of view and reach.

 

Oh and I have looked at all the other posts I can find and nothing really helps. I'm just at a complete loss.

 

Cheers,

Charlie

[welshpug 1,666]

check that power is exiting the switch when you press it.

[riddlecharlie 0]

Yes, power is exiting the switch when I press it. I can only think that it is the motors, however would it not be strange for both to have died at once?

[riddlecharlie 0]

Just to make that clearer there is no voltage across the switch when it is pressed