Ian205 3 1 Cars Posted November 4, 2013 (edited) well folks looking for rear brake lines for my 205, the 1.6 lines are far too long , may consider braded lines anybody know where id pick up a set of these ? fyi i have 1.9 rear axle on my 205 .thanks Edited November 4, 2013 by Ian205 Share this post Link to post Share on other sites
welshpug 1,646 Posted November 4, 2013 if its still plumbed like a 1.6 then you need to use 1.6 lines, and then just run a full rigid line to the caliper, do away with the last short flexi to the caliper as per all later PSA vehicles that used the bendix caliper. Share this post Link to post Share on other sites
Ian205 3 1 Cars Posted November 4, 2013 it is plumbed as 1.6 back as far as the rear axle where it is removable just above the rear beam, its just the 1.6 from there back are way too long as they dont have to travel as far to the calipers as the drums, its just the lines from the connection at the rear beam to the caliper i need. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted November 4, 2013 Solid copper pipe you mean? If so pop along to your local garage and get them to make you a couple, should be £20.00 ish Share this post Link to post Share on other sites
Simes 248 2 Cars Posted November 6, 2013 Or buy a tool, some 'ends' and copper pipe and make your own. Did the whole of my car from m/c to compensators in an afternoon. Share this post Link to post Share on other sites