Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
nour_peugeot

For Gti-6 Owers >> Some Questions

Recommended Posts

nour_peugeot

hey guys


i think i have many problem on my engine but many friends say to me that's normal .

first
i got some white smoke at the end of rev 7500 rpm it's a little but i don't know why it that get out form exhaust muffler .....

second

i have low acceleration from 1000 rpm to 1500 rpm after 1500 rpm i feel like a gate open :D

third

i have't oxygen sensor is that problem ? i i feel my car run faster without it

at last
what the perfect oil i most use .. fast road use

im useing ( shell 15w20 )

thanks for your time :)

Share this post


Link to post
Share on other sites
allanallen

Re-fit the oxygen sensor and use 10w40 oil.

  • Like 1

Share this post


Link to post
Share on other sites
Dizzee stuff

As above but also make sure the VSS is working, this will give the low down hesitation.

  • Like 1

Share this post


Link to post
Share on other sites
welshpug

and change gear earlier, peak power is at 6500 !

  • Like 2

Share this post


Link to post
Share on other sites
hattjosh

Seconded on the vss for low down hesitation, just replaced my cheapo £12 ebay vss for a genuine one from a stealer and the car has been transformed.

Share this post


Link to post
Share on other sites
nour_peugeot

Seconded on the vss for low down hesitation, just replaced my cheapo £12 ebay vss for a genuine one from a stealer and the car has been transformed.

do you have a link ?

Share this post


Link to post
Share on other sites
camgti

Was your car holding revs during gear changes etc?

 

Cam

Share this post


Link to post
Share on other sites
nour_peugeot

6800 rpm

but it's good after 3000 rpm

Share this post


Link to post
Share on other sites
nour_peugeot

i do every thing and can't fix it yet

Share this post


Link to post
Share on other sites
Dizzee stuff

Have you checked the wiring to the VSS ? it may not have been done correctly at the time of the conversion.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×