T16 Coolant Hose Distribution Flange On Rear Of Engine

[B11 BOB 11]

On the rear of my T16 engine I have a distribution flange for the coolant hoses on a normal application there is 3 outlets one goes to the heater matrix the other to the water pump and the 3rd one goes to the thermo housing.

However on my application I have removed the heater matrix and would like a flange with only 2 outlets is there one I can get to suit my needs and what would the part number be?

 

Cheers

[welshpug 1,657]

sounds like a gti6 one is what you want, lower radiator hose connects to it as does the metal water pipe across the rear of the block which goes up to the thermostat housing and tee's off to the heater matrix at the top end.

 

Peugeot part number is 1336 K6, and servicebox has a price against it of £300.

 

the square section round rubber seal for it is 1339 83, listed at £1.27

 

 

I have one of the castings I could do you for £15 delivered if that suits.

[B11 BOB 11]

sounds like a gti6 one is what you want, lower radiator hose connects to it as does the metal water pipe across the rear of the block which goes up to the thermostat housing and tee's off to the heater matrix at the top end.

 

Peugeot part number is 1336 K6, and servicebox has a price against it of £300.

 

the square section round rubber seal for it is 1339 83, listed at £1.27

 

 

I have one of the castings I could do you for £15 delivered if that suits.

Can you please put up a image of the one you got and if it is what I want ill have it asap.

[welshpug 1,657]

This is what I have

 

 

 

[B11 BOB 11]

Can you pm me your bank details and post it out to me asap I need this before weekend if possible.

[caballino 11]

Did you solve this problem? I have a T16