Gti6 Clutch

[johniban 59 1 Cars]

has anyone got the part number for a standard valeo gti6/xsara vts clutch kit? i want to order one from euro car parts but there is a choice of two

[welshpug 1,657]

If there is two i can only imagine one is a cheap tat transmech one and the better is valeo/luk

 

Though most will use the 1.9 mi/bx16v push clutch.

[johniban 59 1 Cars]

im using the standard vts box not sue what clutch i need really, id prefer a push clutch if i could fit one.

 

theres a choice of two valeo

[welshpug 1,657]

Change the clutch arm to a push type, job done.

[S@m 156]

Vts pull clutch p/n is 2050s9, i use one on my mi16.

Edited October 25, 2013 by Sam306

[johniban 59 1 Cars]

Change the clutch arm to a push type, job done.

 

Will the clutch arm from the 1.9 box fit? id love to use a push clutch they are so much more less hassel! but then i dont know what clutch i need, what can i type it on euro car parts to find a push type clutch?

just look up a citroen bx 16v?

[johniban 59 1 Cars]

http://www.eurocarparts.com/clutch-kit

 

one of these?

[welshpug 1,657]

yes, fit the complete kit from your BE3 push clutch gearbox (cross-shaft/fork, arm, matching bushes i.e if they are white fit white, yellow fit yellow.)

 

buy a bx 16v clutch, job done.

 

standard be3 cable, no faffing.

 

that link doesn't point to anything specific.

Edited October 25, 2013 by welshpug

[johniban 59 1 Cars]

i know it doesnt that is the problem there is a choice of clutches i dont no witch one to go for

[welshpug 1,657]

YOU have to decide, all the options are there plain as day!

[dcc 855]

I used a standard GTI6 clutch on my 8v XU, with a mi16 pressure plate and a be3 release bearing, this is all for a be4 gearbox from a xsara vts. hope this helps.

Edited October 26, 2013 by dcc

[johniban 59 1 Cars]

what i was asking is that there was a choice of diffrent clutches on euro car parts, two of the same make, in the end i went for an luk clutch as it was a decent price and they are pretty good clutches and there was only one to choose from

 

But now i have trouble as ive tried to swap over the parts from the gti box to the vts box and i cant get the pin out the gti box :/