Where Should This Go?

[ASBGTi 9]

Hi everyone,

 

Couple of things I've noticed on my S16, there is a vacuum junction with an outlet on it with nothing connected to it. See pic:

 

 

Also there is a vacuum hose which goes nowhere....it's next to the master cylinder and connects to a t-piece one of which goes in to the bulk head and the other goes in to the scuttle panel. See pic:

 

 

Any ideas...?

 

Cheers ASB

[welshpug 1,657]

Cant make out the first pic, second one is the servo vacuum feed, should be connected to the intake manifold or the vacuum pump.

[glenwah 20]

If it's the loose pipe in the second picture your talking about then that is for the sunroof and joins to a t piece near the servo.

[ASBGTi 9]

Cant make out the first pic, second one is the servo vacuum feed, should be connected to the intake manifold or the vacuum pump.

Definitely not servo that's a larger pipe. But I think the answer is above. Here's a better picture or the second from my original post:

If it's the loose pipe in the second picture your talking about then that is for the sunroof and joins to a t piece near the servo.

That's the one! Where should it go?

[glenwah 20]

Comes from the manifold or vacuum pump up to a t piece directly above the servo, then a piece of same size pipe down to the servo with a reduced sized stub on the t piece to the sunroof

[Miles 331 1 Cars]

It's left blank, don;t worry

[ASBGTi 9]

Cheers all