BDA-it 4 1 Cars Posted October 3, 2013 Has anyone used the fog light holes to fit brake ducts? It seems that on full lock that the wheel comes close to the inner wing so you can ring any actual tube but could make up a deflector plate to push the air towards the calliper’s! Are there any pics of what people have done and what vents/ducts they have used in the bumper? Was thinking using something like this, http://www.demon-tweeks.co.uk/performance/brake-ducts-ducting/demon-tweeks-rectangular-intake-duct Will have a measure up when i have a chance! Share this post Link to post Share on other sites
BDA-it 4 1 Cars Posted October 3, 2013 When i did a search earlier nothing came up, i tried it agian and few good threads came up with memeber shoming deflector plates attached to the wishbone and using small tubing! Will crack on next week before the next outting! Share this post Link to post Share on other sites
HERMAN 33 Posted October 3, 2013 I put mine in the front valance Share this post Link to post Share on other sites
BDA-it 4 1 Cars Posted October 4, 2013 Have you run tubing to the discs? Share this post Link to post Share on other sites
HERMAN 33 Posted October 5, 2013 yes 2" ducting p cliped to the sump & gearbox then cable tied to each wish bone. Quick to remove and no rubbing issues. Share this post Link to post Share on other sites