R5-al 2 1 Cars Posted August 31, 2013 Ive just got me a 10 point roll cage for my 205 (sunroof model) and on the fitting article on here it says that the headlining has to come out. I was just wondering if anyone has managed to fit a cage with the head lineing left in as I would like to keep mine if poss. Share this post Link to post Share on other sites
Wes 86 1 Cars Posted August 31, 2013 I have got the rear half of an omp cage in mine with the head lining still in place. You have to remove the sunroof sliding blind and rails for it to fit. I cut the lining in half and slide both bits back into place once the cage was fitted, you can't see the join as its directly above the hoop bar. Share this post Link to post Share on other sites
B11 BOB 11 Posted September 1, 2013 Alex Come and have a look at mine when you can ive fitted a omp roll cage and never had to take the roof lining out etc.The chap who fitted my roll cage is not far from where you are either. Share this post Link to post Share on other sites
chipstick 382 1 Cars Posted September 1, 2013 Is yours a factory sunroof model or dealer fit? Share this post Link to post Share on other sites
R5-al 2 1 Cars Posted September 1, 2013 Thanks lads . As for the sunroof im not sure whats the difference between the factory and dealers? Share this post Link to post Share on other sites
marksorrento205 80 Posted September 1, 2013 Mine is fitted with the roof liner in place. As Wes said I had to remove the sunroof slider blank parts too. Share this post Link to post Share on other sites
Rams_gti6 12 1 Cars Posted September 1, 2013 Slight change and hijack but does the safety devices cage (c12) need headlining to be removed? Share this post Link to post Share on other sites
mike174 9 Posted September 1, 2013 Nope iv fitted the sd cage with a sunroof headlining in place didnt even have to remove the slider although i then couldnt move it. Share this post Link to post Share on other sites