System Drain And Flush

[surfer69 2 1 Cars]

Morning everyone,

Going to drain and flush my coolant system today..what is best..just take the bottom rad hose off and let it drain if it hasn't got a bleed screw on the rad?.

Where are the bleed screws..on the pipes going through the bulk head?.

Thanks.

[farmer 328 1 Cars]

Get some coolant flush as well, I used Holts.

[TheReaperWaits 6 1 Cars]

Hose pipe would be good to get most of the muck out.

 

There are two bleed screws. One on the pipe where the heater matrix pipes come back through to the engine bay. The other just above the thermostat.

[surfer69 2 1 Cars]

Cheers Aaron,found them.k