acox99 74 1 Cars Posted August 30, 2013 As above, what is involved in fitting a 405 interior light timer or just a dimmer into the system. Is it plug and play? Share this post Link to post Share on other sites
ade 4wd 11 Posted August 31, 2013 Not plug and play im afraid. The 205 Gentry had it as standard. Some wiring will be required for other 205 models. Share this post Link to post Share on other sites
Henry Yorke 269 3 Cars Posted September 1, 2013 I assume there is some method of putting a big capacitor in line which would hold the charge to keep it on for a bit. I'm no electrician though..... Share this post Link to post Share on other sites
acox99 74 1 Cars Posted September 2, 2013 Mk4 golfs use an inline capacitor in the drivers door. Might be able to adapt it. Even if it only works the dimer from the drivers side. Share this post Link to post Share on other sites
Anthony 1,002 Posted September 2, 2013 Door switch feed is common on the drivers and passenger doors on the 205, so if it works on one side it'll work on both, Share this post Link to post Share on other sites
acox99 74 1 Cars Posted September 2, 2013 I might pop to the scrap yard and experiment then. Share this post Link to post Share on other sites
