Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
clayts

Rear Drum/hub Loose

Recommended Posts

clayts

 

Following a spirited track session yesterday, on the drive home in the 205 it felt as though the RHS rear wheel was loose or unbalanced. I pulled over, wheel nuts were tight, so I slowly drove the rest of the way home.

 

Last night I had a quick look with the wheel off and the problem seems to be the hub/drum. I removed the grease cap and the hub nut seems tight - but the drum itself is loose. This would explain why the wheel felt like it was unbalanced.

 

But because the hub nut seems tight and the stake is in place there is obviously a problem. Wheel bearing? No noise leading up to the problem, though.

 

I won't have time for a few days to take the hub off and have a look. Any tips on getting the hub nut off?

Share this post


Link to post
Share on other sites
Tom Fenton

Sounds like wheel bearing from your description. Getting the hub nut off is straightforward enough, 32mm socket needed.

Share this post


Link to post
Share on other sites
clayts

Just to close this post out - it was a failed wheel bearing.

Cheers

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×