Fog Light Connector

[ALEX 98 1 Cars]

Is there supposed to be a rubber cover over the electrical connector to the rear fog light in the valance.

Mine's not got one and it looks a bit open to the elements ,but then again so does most of the connections on the 205

 

Is there a universal product that I can buy?

 

Or does anyone have one spare going cheap?

[Anthony 1,003]

Yes there is supposed to be a rubber cover, although it's a lousy design in truth and many are missing as they can fall off.

 

I dare say that you could fashion something far better with a generic rubber boot. Some waxoyl or vaseline to "seal" the connector works wonders too.

[welshpug 1,657]

I think I might have one, will have a dig in the box of spares tonight, you could seal up where the wires go with a dab of silicone, the lamp end sits tight enough usually.

[ALEX 98 1 Cars]

I think I might have one, will have a dig in the box of spares tonight, you could seal up where the wires go with a dab of silicone, the lamp end sits tight enough usually.

 

If you could that would be great!

 

I'm also after one plastic front door speaker rear sheild.

A cheap looking thin piece of plastic, half moon shaped, that I think stops water from dripping onto the back of the speaker.

 

You need anything?