bigalthenutter 8 2 Cars Posted May 21, 2013 is it possible to get a vin plate re stamped as mine is rotten ? Share this post Link to post Share on other sites
welshpug 1,646 Posted May 21, 2013 I believe you can order one from Peugeot, unusual for it to be "rotten" though, as it is aluminium Share this post Link to post Share on other sites
Anthony 1,002 Posted May 21, 2013 Unless you mean where the VIN is stamped on the scuttle panel above the brake servo, which can/does rust. Share this post Link to post Share on other sites
bigalthenutter 8 2 Cars Posted May 21, 2013 no not the stamp on scuttle tray the aluminium plate which is riveted i have had a few that have gone around the rivet holes alloy and steel rot each other on bare material contact. Share this post Link to post Share on other sites
MiniGibbo 142 Posted May 21, 2013 Any engineering shop with press tools should be able to make you the little alloy plate. Share this post Link to post Share on other sites
dogboy1066 2 1 Cars Posted May 21, 2013 Bi metallic corrosion! There used to be sellers on the 'bay who supplied replacement vin plates, not stamped. I bought one for a non Peugeot. You can buy the stamp letters from machine mart, but a machining/engineering work shop or old fashioned hardware store may be able to stamp it for you. Share this post Link to post Share on other sites
bigalthenutter 8 2 Cars Posted May 21, 2013 bi metalexactly ! Lol i have a set of stamps may have a go at making one see how it goes . Share this post Link to post Share on other sites
Tom Fenton 1,536 Posted May 21, 2013 If its only around the rivet holes I would personally drill a couple of new holes say opposite corners and screw or rivet it back on. It will be pretty obvious why thaty has been done, whereas a wonky home made VIN plate will raise alarm bells with the rozzers/MOT man/potential buyer etc. 1 Share this post Link to post Share on other sites
MikeC 10 Posted May 21, 2013 Maybe clear anodize the plate, won't react/rot then. Share this post Link to post Share on other sites
bigalthenutter 8 2 Cars Posted May 21, 2013 none of the above are an option as its for 100% original restoration and i know you can get it anodised silver and its barley noticable but i need a good plate to start with. il have one made up from pug think thats best bet Share this post Link to post Share on other sites
ORB 227 1 Cars Posted May 21, 2013 For a 100% original restoration, I would want the original vin plate.... 1 Share this post Link to post Share on other sites
GLPoomobile 958 Posted May 22, 2013 none of the above are an option as its for 100% original restoration and i know you can get it anodised silver and its barley noticable but i need a good plate to start with. il have one made up from pug think thats best bet Original and restoration are kind of mutually exclusive. If restoring, you are going to have to replace parts. If you want originality, you have to accept the patina. Share this post Link to post Share on other sites
bigalthenutter 8 2 Cars Posted May 22, 2013 Original and restoration are kind of mutually exclusive. If restoring, you are going to have to replace parts. If you want originality, you have to accept the patina. this is true but why discard a well used gti as not original? things wear out and have to be replaced even on very low millage examples the tyres will not be factory original neither brake pads or shoes etc. if paintwork has to be redone or a windscreen has to be replaced it makes no odds, no 205 will be absolutley original showroom condition unless its never been driven. so long as nothing is modified to me that is original. restoring is returning it back to its former original glory. Share this post Link to post Share on other sites
MikeC 10 Posted May 22, 2013 You can get it anodised clear which involves it not being dipped in the dye. Share this post Link to post Share on other sites
farmer 328 1 Cars Posted May 23, 2013 You will never get it 100% original as stated. the parts are just not out there , even I have to make compromises with colour etc. 1 Share this post Link to post Share on other sites