Throttle Cable For 16V Conversion

[Alastairh 47]

Hello,

 

I am just finishing off a 16v conversion which is the first i have done for 5 years. Previously i use to buy 405 petrol throttle cables which are basically a kit with all the fitting and you just trim down the cable to the required length. After looking on service box they are NFP, GSF and euro car parts weren't that much help although i will pursue further with them.

 

Any alternatives like the 405 kit, or does someone know a good supplier?

 

Cheers

 

Al

[welshpug 1,657]

I've used a few firsline kits, most motorfactors stock them,they aren't 405 specific just pug and similar, its just a fairly thick wall plastic tube not the steel wound wire like originals though, which Wont like tight radius or much heat.

 

much like dealers, some branches of GSF and ECP can be a bit naff, but I managed to find these for you:

 

http://www.gsfcarparts.com/712pc0040

 

http://www.carparts4less.co.uk/search/647545091

 

GSF is cheapest online, might even get it cheaper in branch which is my experience of my local.

 

pug part number is 1629 86 for nearly all 205's so would be a "kit" I imagine though I have never used one.

Edited April 30, 2013 by welshpug

[Roon 29 1 Cars]

Replaced mine last week on my gti6 conversion. Just ordered as welsh said the 205 gti kit. Which was 14 quid. It's universal and has all the bits and just trim it down.

 

Took me all of 10 minutes. I got mine from CPA at that price btw.

[2052NV 24]

I just go to the local push bike store and get a rear brake cable with the correct sized lug at the throttle pedal end then make the other end up.... profit

[starky5 18]

I did the same as 2052NV did, I used push bike brake outer casing which you can cut to length and fitted straight into the old ends perfectly. Then I used a gear cable inner wire as it has the correct end for the throttle pedal and a solder less nipple on the other end. It all fitted really well and cost about £6

[Daviewonder 533 3 Cars]

The universal kit is avaliable from First Line part no is FKA1000

 

 

It's available from most motor facctors or FPS.

[Jemehan 3 1 Cars]

Used the 306 cable from euros, a kit with the metal coiled plastic, modified the end to suit my s16, works a treat.

[Alastairh 47]

Daviewonders part number was spot on.

 

Cheers

 

Al