Window Washer Plumbing

[ALEX 98 1 Cars]

I have a long black rubber hose about 1ft long, a short rubber hose about 3" long, a little tee piece and the long clear pipe from the washer pump, which I need to cut to length yet.

I know the connection is obvious, but theres extra clip holes everywhere on the bonnet that I don't think are used? Possibly for RH drive models?

 

Any one have a picture as no matter which way round I plumb them up it all hangs down and looks wrong.

 

[pug_ham 244 3 Cars]

The picture below might help;

 

 

The hose has one clip on the bonnet before the n/s jet T piece & another for the piece of hose between that & the o/s jet nozzle.

 

Have you routed it through the scuttle panel hole?

 

g

[ALEX 98 1 Cars]

The picture below might help;

 

 

 

The hose has one clip on the bonnet before the n/s jet T piece & another for the piece of hose between that & the o/s jet nozzle.

 

Have you routed it through the scuttle panel hole?

 

g

 

 

Thanks for that! should have it sorted now.

Good point, forgot about the scuttle pannel! LOL